Tecniseal Aquarium 110 Data Sheet

Product Description TECNISEAL 110 Aquarium is a premium quality, ready-for-use, One-component sealant which reacts with atmospheric moisture at room temperature to form an elastic rubber like seal
Typical Applications Bonding of frameless aquariums, all-glass assemblies, laminated glass.
Application Adhesion surfaces must be clean, dry, sound and free from dust and release agents. Do not use primer on glass and glazed surfaces. Use Primer TECNICON FD for porous surfaces. On metals Primer TECNICON 790 and on plastics Primer TECNICON FDK may optimize sealant adhesion. Please refer to Primer Chart for recommended surface preparation.
Cure System Acetoxy    
Density 1.03 g/cm 3 DIN 52451  
Application Temperature +5C to +40C    
Service Temperature -60C to +180C   DIN 52455-4  
Hardness Shore A Approx. 25  DIN 53505   ASTM D 2240-68
Modulus at 100 % Extension  Approx. 0.4 N/mm 2  DIN 52455-2  EN 28 340
Elastic Recovery Approx. 100%  DIN 52458  EN 27 389
Movement Accomodation 25%    
Strength Coefficient 0.1 N/mm 2    
Viscosity Non sagging  DIN 52454  EN 27 390
Skin Formation Time 10 to 20 minutes    
Cure Rate Approx. 3 mm/24 h    
Auto Ignition Approx. 450C  DIN 51794  
Safety Labelling Not required
Specifications Meets requirements of DIN 18545-D
Standard Colours Translucent
Packaging 310 ml plastic cartridge, 20 cartridges/carton case. Special packaging upon request
Storage Store in cool and dry conditions in original packaging.
 Shelf life  18 months.
Precautions see EC Security Data Sheet. Keep away from children. Avoid skin and eye contact. After contact with skin or eyes rinse immediately with plenty of water and seek medical advice. Ensure adequate ventilation. The above specifications are the result of careful research and development. All previous specifications are hereby null and void. Users are themselves responsible for ensuring the suitability of the product for the purpose intended, liability on the part of B&N  being limited to the purchase price of the material. B&N cannot accept liability for damage, in particular that caused by the use of the product or its unsuitability, nor can B&N  accept responsibility for unauthorized recommendations or guarantees which deviate from or exceed the specifications given in this procuct data sheet.