Egocryl 530 Data Sheet

Product Description EGOCRYL 530 is a ready-for-use, one-component, physically drying, water based acrylic sealant forming a durable plasto-elastic seal.
Typical Applications Sealing of perimeter and expansion joints (interior and exterior), typically on absorbent substrates such as concrete, gas-concrete, fibre cement, plaster, gypsum/carton sheets and wood.
Application Adhesion surfaces must be clean, sound and free of dust and release agents. Grease, oil and loose particles have to be removed. Substrates may be damp, however, should not be wet. Porous and absorbent substrates should be primed with water diluted EGOCRYL 530 (1: 4) or EOPRIMER 390 R. Avoid three-sided adhesion.
Material Basis Acrylic Dispersion    
Density Approx. 1.45 g/cm3 DIN 52451  
Application Temperature +5C to +30C    
Service Temperature -20C to +80C DIN 52455-4  
Movement Accomodation 12%, temporarily to -10C    
Viscosity Non sagging DIN 52454 EN 27 390
Skin Formation Time 10 to 20 minutes, full cure after approx. 7 days
Weather Resistance Resistant to rain after approx. 2 h
Standard Colours White
Packaging 310 ml plastic cartridges, 20 cartridges/carton case Special packaging is available on request.
Storage Store in cool and dry conditions in original packaging.
Shelf life 12 months, at -10C shelf life limited to 48 h.
Precautions see EC Security Data Sheet. Keep away from children. Avoid skin and eye contact. After contact with skin or eyes rinse immediately with plenty of water and seek medical advice. Ensure adequate ventilation. The above specifications are the result of careful research and development. All previous specifications are hereby null and void. Users are themselves responsible for ensuring the suitability of the product for the purpose intended, liability on the part of B&N PRODUCTS being limited to the purchase price of the material. B&N PRODUCTS cannot accept liability for damage, in particular that caused by the use of the product or its unsuitability, nor can B&N PRODUCTS accept responsibility for unauthorized recommendations or guarantees which deviate from or exceed the specifications given in this procuct data